Tramev

 
 
 
   
   
   
 
 
     
  »Tragbare Geraete  
  »Schneidegeraete fuer Eisen- u. Stahldraht  
  »Schneidegeraete fuer den Kabelbereich  
  »Lochstanzgeraete  
  »Tragbar/Austauschbar  
  »Batteriebetriebene Schneidegeraete  
  »Elektro-hydraulische Schneidegeraet  
  »Zerkleinerer  
  »Metallabfall-Zerkleinerer  
  »Richtapparate  



»TRAMEV - Scheren - Drahtbereich Catalog  

Tramev produces shears and straighteners for wire industry. These machines can cut and straighten wire of 50 mm.  With a wide range of portable tooling for shearing, straighteneing and bending, we enable easy solutions to problems occurring in production and manufacturing of wire , cable strand and bolts.
 

RC 16 Battery operated shear

The latest product launched with a cutting capacity up to 16 mm dia (5/8”)  Light weight at 5.5 kg (12 lbs) this unit has cutting power of 14 ton.  Rechargeable 14.4V batteries allow up to 80 cuts of 13 mm dia and up to 60 cuts for 16 mm dia material.

Units are packaged in a plastic shock proof carrying case with 2 batteries, a battery charger, 2 sets of cutting blades and service tools.

RC 16 Battery operated shear
 
 

Electro-hydraulic chain cutters

shown is the TC32 capable of cutting chain up to 32 mm dia.

Electro-hydraulic chain cutters

 
 

Wire, Rod & Bar Cuttters  

Suitable for material up to 50 mm diameter. Shown is the T22 Electric Shear suitable for cutting up to 22 mm diameter bar, delivering a 30 ton hydraulic power at 700 bar.  Below is the elecrtro-hydraulic T50 capable of cutting solid steel bar up to 52 mm dia

T22 Electric Shear
T22 Electric Shear

Wire, Rod & Bar Cuttters
elecrtro-hydraulic T50

 
 

Accessories

Accessories



Accessories
 

 

Einfache, effiziente und kostenguenstige Schneideloesungen fuer fast alle Draht-, Kabel- und Rundstabanwendungen


TRAMEV liefert tragbare Geraete fuer verschiedene Zwecke wie Kabelscheren, Ablaengen von Rundtsaeben, Biegen und Richten, Flachband-scheren, Mutter und Schrauben, Lochstanzen. Sehr interessant erscheint das Modell MU165, eine tragbare Schneide-vorrichtung fuer Draehte und Rundstaebe bis 16 mm Durchmesser (5/8”).

- more details here...

 

 

Leading Machinery
Germany GmbH

Zeppelinstrasse 44
Ostfildern/Kemnat
D-73760  Germany

Ph:+49 711 4597579
Fx:+49 711 4597581
Em: leadingmachinery

 

© 2014 Leading Machinery Germany GmbH • All Rights Reserved • design by Com-Mark.com